Re: Depth finder

["Chuck vanDe Wetering" <wwp62@xxxxxxxxxxxxxxx>]

Char,

I believe most depth sounders or fish finders are supposed to work even
mounted inside the hull. I tried mounting one in my West Wight Potter 15'
and it did not work. It could have been my lack of skill at mounting. I
removed it from the V-berth inside hull location and mounted it on the
transom where it worked just fine. I believe my San Juan 23 depth sounder is
a through hull located in the V-berth area. I will have to check this out.

Chuck and Barbara Vande Wetering
wwp62@interisland.net
http://www.geocities.com/Yosemite/Rapids/5493
----- Original Message -----
From: Char <charm@blazenetme.net>
To: San Juan 23 List <sanjuan23@PEAK.ORG>
Sent: Monday, May 29, 2000 5:17 AM
Subject: Depth finder


> Hello fellow San Juan'ers
>
> Hope you are either in or about to be in the water and sailing.
>
> Here in Maine, we are still, cleaning, upgrading, etc.
>
> Question: I have a Zercom Marine sonar depth finder, can I mount that in
the
> bottom inside (no holes) of the boat, rather than having it on the outer
> hull?  And if so, do I need special sealant, brackets, etc.?
>
> Thanks for all your help.
>
> Have a thoughtful and reflective Memorial Day.
>
>
>
> San Juan 23 Internet Fleet:
http://www.geocities.com/Yosemite/Rapids/5493/
> San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html
> mailing list commands:  mailto:majordomo@peak.org?body=help


San Juan 23 Internet Fleet:  http://www.geocities.com/Yosemite/Rapids/5493/
San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html
mailing list commands:  mailto:majordomo@peak.org?body=help