|
Ok,
Here's a fairly stupid question that I couldn't find the
answer to on the San Juan website (which is an awesome site BTW - makes
me very happy I finally bought a boat the had a production run of more
than 5 :)
How long should the shaft on the motor be? 15", 20",
25". The longer the better when under way by motor,
but obviously when out of sailing or at dock, I don't want the thing
dragging in the water.
I'd measure the one that came with the boat, but I already pulled
it off and gave it to a mechanic who declared it DOA (it had been
sitting on the back of the boat in the water for 2
years+).
Steve
-------Original
Message-------
Date: Friday,
February 28, 2003 17:40:34
Subject: San Juan 23
wiring diagram
Does anyone have a wiring diagram for the
San Juan 23?
I have a San Juan 23 and I am replacing the Electrical
switch panel to
enable me to add more circuits for an extra light and
depth sounder.
Nothing fancy. When I started to get into the wiring I
found a mess of
splices and wires that went to who knows where. While
I don't want to
rewire the entire boat, I would like to clean up all
of these stray wires.
All of the wires are red going into the panel.
I know that wires going to
different appliances should be color
coded, so I'm not sure what's going on
here.
I know all of the
positive leads go from the panel to the appliance. Where
and how are
the negative wires led to the battery? I assume it's one
common area
such as a bus bar.
Thanks,
Jim
Archives: http://www.mobilegeographics.com/sanjuan23/
San
Juan 23 Internet Fleet: http://www.geocities.com/Yosemite/Rapids/5493/
San
Juan 23 Tech Tips: http://www.geocities.com/Yosemite/2358/index.html
mailing
list commands: mailto:majordomo@xxxxxxxxxxxxxxxxxxxxx?body=help
.
| 
