Re: Centerboard control to cockpit and other projects

["geneandlizadams" <geneandlizadams@xxxxxxxxxx>]

Mike
Mahogany would be my second choice,cedar, or cypress would work. Good luck.
Gene Adams
----- Original Message -----
From: <capndar@xxxxxx>
To: <sanjuan23@xxxxxxxxxxxxxxxxxxxxx>
Sent: Thursday, January 16, 2003 8:46 AM
Subject: Re: Centerboard control to cockpit and other projects


> "geneandlizadams" <geneandlizadams@xxxxxxxxxx> wrote:
>
> >Mike
> >You can make a teak fitting by using a hole saw to conform to your
bulkhead
> >hole, and then drilling a hole through it for your line. If you leave a
> >flange on the outside, you can caulk it in and look good.
>
>
> Gene:
>
> Good tip -  I can see that working well.....any other wood that would work
well?
> Mike R
>
> Archives:  http://www.mobilegeographics.com/sanjuan23/
> San Juan 23 Internet Fleet:
http://www.geocities.com/Yosemite/Rapids/5493/
> San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html
> mailing list commands:  mailto:majordomo@xxxxxxxxxxxxxxxxxxxxx?body=help
>


Archives:  http://www.mobilegeographics.com/sanjuan23/
San Juan 23 Internet Fleet:  http://www.geocities.com/Yosemite/Rapids/5493/
San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html
mailing list commands:  mailto:majordomo@xxxxxxxxxxxxxxxxxxxxx?body=help