Rudy, I would like a
picture of the reducer coupling that attaches under the sink basket if you
have one. I have a 2 inch threaded basket but no coupler to reduce the
diameter with a hose nipple. I’m trying to figure out how to go from the
threads to a hose. Thanks.
-----Original
Message-----
From: owner-sanjuan23@xxxxxxxxxxxxxxxxxxxxx
[mailto:owner-sanjuan23@xxxxxxxxxxxxxxxxxxxxx] On Behalf Of Mayer, Rudy
Sent: Wednesday, April 02, 2003 1:21
PM
To:
'sanjuan23@xxxxxxxxxxxxxxxxxxxxx'
Subject: Newwbie seeks Headsail rigging
info, more and offers info
Got the headsails out and checked
them over last night one more time and then realized....I have no idea how the
tack attaches to the "funny" looking bent-armed cleat! What's the trick
here?
And does anyone have or know about
a water tank replacement? I have a 12 gal tank that sits in the
starboard lazerette but it is cracked I discovered. It has a fill hole
with a air valve in the cap so it can be pressurized to some degree. I'd
like to replace it. Suggestions?
Oh, and my vessel has a factory
installed cock for a sink drain. Appears to be a gate type since it
looks like an outdoor faucet cock. It is 3/4" connected to a 2" sink
drain but there is a reducer coupling threaded onto the basket that acts as
the nut I believe......I can try for a picture if requested, but it may not
work. Let me know.
Also, my manual suggests putting
the battery in the aft portion of the port sette, which would move it forward
maybe the width of the battery! But that would be out of my gas
cockpit.
Thanks for everyone's
help.
