Re: Deck thickness on San Juan 23

[Jim Willis <Jim.Willis@xxxxxxx>]

Thanks, Gene.  I appreciate your time in answering this.
Jim


                                                                           
             "geneandlizadams"                                             
             <geneandlizadams@                                             
             seanet.com>                                                To 
             Sent by:                  <sanjuan23@xxxxxxxxxxxxxxxxxxxxxxxx 
             sanjuan23-admin@l         com>                                
             ists.mobilegeogra                                          cc 
             phics.com                                                     
                                                                   Subject 
                                       Re: Deck thickness on San Juan 23   
             02/23/2006 02:17                                              
             PM                                                            
                                                                           
                                                                           
             Please respond to                                             
             sanjuan23@xxxxxxx                                             
             obilegeographics.                                             
                    com                                                    
                                                                           
                                                                           




Jim
The deck is about an inch thick in most places. There is a fiberglass inner
liner that is about 1/4" thick and a 3/8" thick balsa core between the
inner
liner and the deck. Anything you hang should not go far into the balsa
core.
I hung a lantern from a n eye strap that I epoxyed to the overhead and it
held fine. Sand the area where the strap is to go, and put a generous dab
of
epoxy on the strap so it comes trough the screw holes, and tape it up until
the epoxy dries. you should be able to hang light loads from the strap with
no problems.
Gene Adams
----- Original Message -----
From: "Jim Willis" <Jim.Willis@xxxxxxx>
To: <sanjuan23@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Sent: Friday, January 27, 2006 12:56 PM
Subject: Deck thickness on San Juan 23


>
> Does anyone know the thickness of the deck in the area around the chain
> plates?  The reason that I'm asking is that I want to install a radio/CD
> player in this area and hang it from the roof of the cabin just over the
> port seatee.  I have a case for the radio that I plan to screw into
place,
> but I don't want the screws to go pop out through the deck.
> Thanks,
> Jim
>
> _______________________________________________
> Sanjuan23 mailing list
> Sanjuan23@xxxxxxxxxxxxxxxxxxxxxxxxxxx
> http://lists.mobilegeographics.com/mailman/listinfo/sanjuan23
> San Juan 23 Internet Fleet:
http://www.geocities.com/Yosemite/Trails/5492/
> San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html
>

_______________________________________________
Sanjuan23 mailing list
Sanjuan23@xxxxxxxxxxxxxxxxxxxxxxxxxxx
http://lists.mobilegeographics.com/mailman/listinfo/sanjuan23
San Juan 23 Internet Fleet:  http://www.geocities.com/Yosemite/Trails/5492/
San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html