RE: Anchor Locker - followup

["David Gottschalk" <dkg1952@xxxxxxxxxxxxxx>]

Mike,

I cut some fiberglass screen material to cover the bottom of the locker plus
some excess.  I used a silicone sealant to affix the screen to the bottom of
the locker.  I left some play in the screen, not stretched tight.  This
seems to work good at collecting the debris (until I can clean it out) and
yet keeps the hole clear for water passage.

-- Dave Gottschalk

-----Original Message-----
From: sanjuan23-admin@xxxxxxxxxxxxxxxxxxxxxxxxxxx
[mailto:sanjuan23-admin@xxxxxxxxxxxxxxxxxxxxxxxxxxx] On Behalf Of
mike_hancock@xxxxxxxxxxxxx
Sent: Wednesday, October 18, 2006 10:22 PM
To: sanjuan23@xxxxxxxxxxxxxxxxxxxxxxxxxxx
Subject: Anchor Locker - followup

I found the tech tip on the anchor locker. It specifies a 1/16 hole for a
drain. That seems small and prone to blockage. Has anybody enlarged the
drain hole?


_______________________________________________
Sanjuan23 mailing list
Sanjuan23@xxxxxxxxxxxxxxxxxxxxxxxxxxx
http://lists.mobilegeographics.com/mailman/listinfo/sanjuan23
San Juan 23 Internet Fleet:  http://www.geocities.com/Yosemite/Trails/5492/
San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html