San Juan 23 mailing list (courtesy of Mobile Geographics LLC)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Anyone replaced an internal (wooden) bulkhead?

I use half inch mahogany plywood, with teak faces. Varnish makes a nice
finish, with at least five coats. Make sure you use marine, or at least
exterior plywood. Medium density plywood works well, if you can laminate a
veneer over it.
Gene Adams
----- Original Message -----
From: "Paul Borghese" <>
To: <>
Sent: Monday, December 02, 2002 8:12 AM
Subject: RE: Anyone replaced an internal (wooden) bulkhead?

I need to replace my bulkheads as well.  What type of wood did you use?
Marine Plywood?  Also, how did you finish the edges?  Did you use varnish to
finish the wood?



-----Original Message-----
[] On Behalf Of
Sent: Sunday, December 01, 2002 7:08 PM
Subject: Re: Anyone replaced an internal (wooden) bulkhead?

Just finished replacing bulkheads myself. I am a finish carpenter, but it
should not be a big job for anyone. I believe there is plenty of info in the
tech tips. If you need any advice, let me know.

                            William Best

San Juan 23 Internet Fleet:
San Juan 23 Tech Tips:
mailing list commands:

Date Index | Thread Index