San Juan 23 mailing list

Mobile Geographics MapTap for PalmOS CelestNav for PalmOS IQ Booster for iQue 3600 SJ23 links tides

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: centerboard question

The center board is lifted by an eye strap on the back of the board. It is held in place by two 10 x24 x3/4" machine screws that are taped into the board I have the eye straps, if you don't find them.
Gene Adams
----- Original Message -----
Sent: Tuesday, May 25, 2004 7:23 PM
Subject: Fw: centerboard question

-------Original Message-------
Date: Tuesday, May 25, 2004 09:13:08
Subject: centerboard question

I think that my company has blocked all incoming and outgoing mail to the mobilegraphics system. I have been trying to get some answers regarding the centerboard. Could you please post the message below to the mail list for me?



Hi all. I have just gone through the process of making a new centerboard, and I have a big question. How does the lift cable attach to the board? It looks in the pictures like it is a piece of hardware mounted on the 3/8" side of the board. The one I removed had a hole drilled through the board through which a pin was placed to hold the hardware that was used. This is not working! The pin is just a bit too long (wide) to fit all the way up into the slot and the board winds up stuck in the halfway position! I am extremely frustrated, not to mention missing some great sailing days recently. Has anyone gone through the process of making a new board, or does anyone know the correct way to do this?


  IncrediMail - Email has finally evolved - Click Here

Date Index | Thread Index