San Juan 23 mailing list

Mobile Geographics MapTap for PalmOS CelestNav for PalmOS IQ Booster for iQue 3600 SJ23 sailwx.info tides

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: try another one




Dave
  Sika flex 291 is your best best bet. 5200 is not a good adehiesive to use
as it tends to take some of the fiberglass with it when you try to remove
it.
Geen Adams
----- Original Message -----
From: "DB27513 (David)" <db27513@xxxxxxxxx>
To: <sanjuan23@xxxxxxxxxxxxxxxxxxxxx>
Sent: Monday, May 16, 2005 11:08 AM
Subject: try another one


> To all that responded about the halyard lines - thanks!  Very useful
> info. Thought I might try another one:
>
> Ive got a handheld compass that has a 'tube like' handle.  A sleeve is
> included with screws to mount it, so you can slide it into the sleeve,
> and take it out again.  My SJ23 has a million drilled holes on the
> inside and outside already, and I dont want to make any more.  So in
> mounting this sleeve to the outside wall of the cuddy, what would be
> the best compound, knowing that I might want to move the mount if there
> is too much magnetic interference.  So it needs to hold, but be
> removable with scarring. I have marine silicon, 5200, Silkaflex 291. Is
> there another?
>
> Also, once open, will a large tube of 5200 or silkaflex keep?
>
> David Backus
>
> "The difference between an ordeal and an adventure is attitude."
>
> Archives:  http://www.mobilegeographics.com/sanjuan23/
> San Juan 23 Internet Fleet:
http://www.geocities.com/Yosemite/Rapids/5493/
> San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html
> mailing list commands:  mailto:majordomo@xxxxxxxxxxxxxxxxxxxxx?body=help
>


Archives:  http://www.mobilegeographics.com/sanjuan23/
San Juan 23 Internet Fleet:  http://www.geocities.com/Yosemite/Rapids/5493/
San Juan 23 Tech Tips:  http://www.geocities.com/Yosemite/2358/index.html
mailing list commands:  mailto:majordomo@xxxxxxxxxxxxxxxxxxxxx?body=help


Date Index | Thread Index